Clipcomm CP-100E VoIP phone undocumented default port access
| clipcomm-cp100e-default-port (24144) |  High Risk |
Description:
Clipcomm CP-200E and CPW-100E could allow a remote attacker to gain unauthorized access to the device using an undocumented open port. TCP port 60023 is open by default and provides access to the device debug service. An attacker could connect to this port using a telnet client to view or modify device configuration information, reset the device to the factory default settings, write to the registry, dump memory, and perform other malicious activity.
Consequences:
Gain Access
Remedy:
No remedy available as of July 9, 2011.
References:
- Full-Disclosure Mailing List, Mon Jan 16 2006 - 16:11:43 CST: Clipcomm CPW-100E VoIP wireless handset phone open debug service TCP/60023.
- Full-Disclosure Mailing List, Mon Jan 16 2006 - 16:12:18 CST: Clipcomm CP-100E VoIP wireless desktop phone open debug service TCP/60023.
- BID-16289: Clipcomm CPW-100E and CP-100E VOIP Phones Remote Administrative Access Vulnerability
- CVE-2006-0305: Clipcomm CPW-100E VoIP 802.11b Wireless Handset Phone running firmware 1.1.12 (051129) and CP-100E VoIP 802.11b Wireless Phone running firmware 1.1.60 allows remote attackers to gain unauthorized access via the debug service on TCP port 60023.
- SA18505: Clipcomm CWP-100/CP-100E Debug Service Unauthenticated Access
Platforms Affected:
- Clipcomm Clipcomm CP-100E 1.1.60
- Clipcomm Clipcomm CPW-100E 1.1.12 (051129)
Reported:
Jan 16, 2006
The information within this database may change without notice. Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. In no event shall the author/distributor (IBM Internet Security Systems X-Force) be held liable for any damages whatsoever arising out of or in connection with the use or spread of this information.
For corrections or additions please email xforce@iss.net